Current Air Quality Data - Downeast Region

Below are the hourly air quality concentrations for theDowneast Region of Maine for Mar 2, 2015.

Data is reported based on the Air Quality Index.

Special status notes:

IMPORTANT WINTER WEATHER NOTES: 1) Particle pollution forecasts are for the smaller particles. Particle pollution levels tend to climb on cold, calm, clear nights due to nighttime inversions which act like a cap trapping pollution close to the surface. In river valleys and areas with more emissions, especially from wood smoke, levels can reach the moderate range. 2) Coarse particle pollution is also a concern during the winter months. Sand and salt mixtures dry out after a storm. Winds and traffic can stir up coarse particle pollution on roadways and parking lots.

Region Summary - Mar 2, 2015

This chart displays the region's final AQI for each day of the last 7 regardless of which pollutant produced that value.

Bar chart showing high values for each of the last seven days, for the Downeast region.

Hourly Air Concentrations - Mar 2, 2015

[Text explaining what these graphs are]. Ozone charts chart display a running 8-hour average AQI for each hour up to the last hour posted. Particle Pollution charts use a 24-hour running average.

Jonesport Ozone

Monitor Closed

Sipayik (Pleasant Point - Passamaquoddy Ozone

Bar chart of the Sipayik (Pleasant Point - Passamaquoddy monitor station showing the value from each hour for the current 24 hour period Chart Ozone Levels

Interpreting the data

The hourly pollutant values, shown in the graphs, are based on the national Air Quality Index (AQI). The AQI is computed from data collected by a network of air monitoring sites. The AQI converts the pollutant concentrations to a value easily compared to the health standard of each pollutant.

8-hour Ozone and 24-hour Particle Pollution concentrations with an AQI over 100 have exceeded the health standard.

The Regional Summary graph is a visual display of the final AQI value for each day of the last seven days. The final AQI value for a given day is the highest AQI reached by any monitor in that region regardless of which pollutant was involved.

Site-specific graphs display the AQI associated with the current running average. When viewed late in the day one can see how the pollution levels changed over the course of that day.

The color-coding is based on the AQI. Green indicates values in the "good" range; yellow in the "moderate" range; orange in the "unhealthy for sensitive groups" range; red in the "unhealthy" range, and purple in the "very unhealthy" range. An X indicates suspect data.